Sharing Clash at home is less about installing the same app everywhere and more about deciding where traffic should be routed. You can run Clash on a desktop and let selected devices use it as a LAN proxy, put a small side router between your main router and household devices, or run a compatible Clash core directly on your router. Each approach changes how much you configure on individual devices, how much maintenance the household needs, and what happens when the device running Clash is offline. This guide compares the options and walks through the routing, access-control, and testing decisions that make a shared setup reliable.
Choose a Sharing Model Before Changing Settings
Start by identifying what “share Clash” needs to mean in your home. A phone or laptop can connect to a proxy hosted by another computer, but that does not automatically make every app on the phone use it. Likewise, a router with a Clash-compatible core can route traffic for devices that never install a proxy client, but it may require more careful configuration and ongoing maintenance.
- Desktop LAN sharing: Clash runs on a Windows, macOS, or Linux computer. Other devices connect to that computer’s LAN address and proxy port. This is the quickest way to test sharing, but the host must stay awake and connected.
- Side router: A separate router runs a compatible core and serves as a gateway or access point for the devices you choose. It keeps the proxy service independent of a daily-use computer and can create a separate network for selected devices.
- Router-level configuration: Clash or a compatible core runs on the main router. Devices can use the router as their normal gateway, and routing rules can be managed centrally. This is convenient when supported, but it has the greatest impact on the whole network.
Consider how many devices need access, whether they need to use the proxy all the time, and whether non-technical household members should be able to use the network without touching proxy settings. Also decide how you want local devices such as printers, televisions, and network storage to behave. A good design makes those requirements explicit before you expose a listener or change a gateway.
Share a Desktop Clash Listener on Your LAN
Desktop sharing is useful when the computer running Clash is already on most of the time and you want a low-cost way to connect a phone, tablet, or another computer. The host and clients should be on the same trusted local network. Find the host’s LAN address from its network settings or the router’s connected-device list; it will commonly look like 192.168.1.25 or 10.0.0.25. Do not use 127.0.0.1 on a client device: that address always refers to the client itself, not the desktop.
On the host, enable LAN access in the Clash client. The exact control varies between Clash Verge, Clash Verge Rev, and other front ends, but it is commonly labelled Allow LAN or exposed through the active profile’s configuration. A minimal Mihomo-style configuration can look like this:
mixed-port: 7890 allow-lan: true bind-address: 192.168.1.25 mode: rule
Use the host’s actual LAN address for bind-address, and confirm that the address does not change unexpectedly. If your client or core does not support the selected binding option, consult its configuration interface and use the narrowest available LAN binding. Avoid exposing the listener on every network interface unless you understand which interfaces are present and have a firewall rule limiting access.
A mixed port accepts both HTTP proxy and SOCKS connections, which is convenient for clients that offer either choice. If your configuration instead defines separate ports, enter the correct protocol and port on each client. For example, an HTTP proxy entry might use host 192.168.1.25 and port 7890; do not enter the host’s public IP or the address of the remote proxy node. The local listener is the connection point on your home network.
- Enable LAN access on the Clash host and apply or reload the active configuration.
- Allow the listener port through the host firewall for the private network only. On a laptop, check that the current network is marked private or trusted if the operating system uses network profiles.
- On one test device, open its Wi-Fi proxy settings and enter the host’s LAN IP address and the listener port. Choose HTTP or SOCKS according to the listener you configured.
- Test a site that should use the proxy, then test a local service such as a printer or router page. Check the Clash connection list or logs to confirm that requests arrive at the host.
- Repeat the settings on other clients only after the first test works, and record the host address and port somewhere household administrators can find them.
Manual proxy settings usually apply only to apps that respect the operating system’s HTTP or SOCKS proxy configuration. Some games, command-line tools, streaming devices, and system services may ignore it. If a device needs full-device routing, use a supported VPN-style or TUN approach on that device, or choose a router topology designed to route its traffic. A browser-only proxy extension is even narrower: it generally affects only that browser.
Limit Access and Keep the Host Reachable
Turning on LAN access makes a service reachable beyond the computer itself. That can be appropriate on a private home network, but it should not be treated as a harmless toggle. Anyone who can reach an unprotected listener may be able to send traffic through it, consume bandwidth, or use your connection in ways you did not intend. A listener exposed to a guest network, a shared apartment network, or the public internet has a different risk profile from one restricted to a trusted household subnet.
- Bind narrowly: Prefer the host’s private LAN address when supported rather than binding to every interface. If the host changes networks, re-check the binding.
- Use the firewall: Permit the proxy port only on the private interface or trusted subnet. Do not create a router port-forward for a household LAN listener.
- Separate guests: If visitors use a guest Wi-Fi network, check whether it can reach devices on the main LAN. Guest isolation is usually desirable; do not weaken it just to make a desktop proxy reachable.
- Protect the host: Keep the operating system and Clash client current, use a strong account password, and avoid running the host with unnecessary administrator privileges.
- Plan for sleep and address changes: A sleeping desktop cannot serve clients. A DHCP reservation on the router can help keep its LAN address stable without manually assigning an address that might conflict with another device.
Do not confuse a Clash external controller with the proxy listener. The listener handles client traffic; the controller is an API for managing Clash. If you need to manage the controller remotely, restrict access to a trusted network and configure a strong secret. In most home-sharing setups, there is no reason to expose the controller to every device, let alone to the internet.
Use a Side Router for a Dedicated Proxy Network
A side router is a useful middle ground when a desktop should not be the household gateway but several devices need consistent routing. The device runs a compatible Clash or Mihomo core and creates a dedicated Wi-Fi network, or connects downstream devices over Ethernet. You can then put only selected phones, televisions, or laptops on that network while leaving the rest of the home on the main router.
There are two common layouts. In access-point mode, the side router connects to the main network and provides Wi-Fi or wired access. Devices may receive addresses from the main router, and the side router’s exact proxy-routing behavior depends on its firmware and configuration. In router mode, the side router creates a separate subnet and acts as the gateway for its clients. This is easier to reason about for selective routing, but it introduces another network boundary and may create double NAT if the main router also performs NAT.
Before configuring it, check that the main and side routers do not use the same LAN subnet. If both are configured as 192.168.1.0/24, routing between them can fail or become ambiguous. For example, the main router could use 192.168.1.0/24 and the side router’s downstream network could use 192.168.8.0/24. The exact address plan is your choice; the important point is to avoid overlapping subnets and to know which device assigns addresses to each client.
- Update the side router’s firmware and verify that its hardware and operating system support the core and features you plan to use.
- Connect it to the main router using the mode appropriate for your design. Confirm which port is the uplink and which ports serve downstream clients.
- Choose a distinct downstream subnet if using router mode, and set a clear Wi-Fi name so household members can distinguish the proxy network from the normal network.
- Install or enable the compatible core, import a trusted profile, and verify that the profile works on the router before routing client traffic through it.
- Start with one test client. Check DNS, local-network access, and the selected proxy rules before moving additional devices.
- Keep a recovery path: know how to reach the router’s management page from the main network and how to disable the proxy-routing feature if an update or profile change interrupts access.
Consider double NAT before choosing router mode. Many everyday activities work normally behind two layers of NAT, but hosting a service, accessing a device from outside, some multiplayer games, and certain peer-to-peer applications may need extra configuration. An access-point arrangement can avoid an additional NAT layer, but it may not provide the same isolation or policy-routing controls. Choose based on the features the router firmware actually supports rather than assuming that every device labelled “access point” can transparently route all traffic through a proxy core.
Run Clash on the Main Router Carefully
Running Clash on the main router can provide the most centralized experience: clients use the router as their normal gateway, while routing policy determines which connections go direct and which use a proxy group. It can be a good fit when the router has enough CPU and memory, the firmware supports a maintained compatible core, and the administrator is comfortable recovering the network if a configuration change goes wrong.
Do not assume that installing a core automatically captures every device’s traffic. Router implementations differ in how they redirect TCP and UDP connections, handle DNS, support IPv6, and apply rules to traffic from the router itself. Some interfaces offer a transparent proxy or TUN-style mode; others require specific firewall, routing, or policy rules. Read the documentation for the router firmware and core version you are actually using, and avoid copying low-level firewall rules from an unrelated device.
Start with a limited policy. For example, keep local subnets and essential home services direct, then send only explicitly selected domains or clients through a proxy group. If the firmware supports client-based policy routing, you can apply the proxy to a test device first rather than changing behavior for the whole household at once. The exact rule syntax and supported features vary by core and firmware, so validate the generated configuration before applying it.
- Preserve local access: Keep router management addresses, printers, network storage, casting targets, and other private subnets reachable directly. A proxy rule that catches local traffic can make ordinary home services appear broken.
- Plan DNS deliberately: Decide which resolver handles local names and how proxied domains are resolved. Test both domain-based rules and local devices that are discovered through multicast or local DNS.
- Check IPv6 separately: A setup that routes IPv4 correctly may still let IPv6 traffic follow a different path. Confirm whether the router, core, and upstream network support your intended IPv6 behavior; disable or configure it deliberately rather than leaving it untested.
- Measure router capacity: Encryption, rule processing, DNS handling, and multiple concurrent clients use CPU and memory. Test realistic household load instead of relying only on a speed test from a single device.
- Keep recovery access: Save a known-good configuration and learn the router’s reset or recovery procedure before changing gateway-wide rules.
When a router-level setup fails, troubleshoot one layer at a time. First confirm that clients receive the expected address, gateway, and DNS settings. Next confirm that the router itself can reach the internet and that the proxy core has healthy nodes. Then inspect the routing decision for a single client connection. This sequence helps distinguish a Wi-Fi or DHCP problem from a DNS, firewall, rule, or upstream proxy problem.
Compare the Options and Verify the Result
The best option is the least complicated one that meets the household’s actual requirements. Desktop sharing is quick to set up and easy to reverse, but it depends on the host computer and often requires per-device proxy settings. A side router gives selected devices a consistent place to connect and can isolate proxy use from the rest of the home. A main-router setup can be seamless for clients, but it makes router compatibility, policy design, and recovery planning more important.
- Choose desktop LAN sharing for a small number of clients, occasional use, or an initial proof of concept.
- Choose a side router when multiple devices need stable access but you want to leave the main router and most household devices unchanged.
- Choose router-level configuration when the hardware and firmware are well supported and you need centralized rules for many clients.
- Keep a device-level Clash client for mobile devices that frequently leave home or need different proxy behavior on cellular and Wi-Fi networks.
After setup, verify more than whether one website opens. Confirm that the test client can reach the LAN listener or gateway, that Clash shows the expected connection, and that the selected rule sends the connection to the intended policy. Test at least one domain expected to use a proxy, one expected to connect directly, and one local service. If an app behaves differently from a browser, check whether that app honors the system proxy or requires transparent routing.
Also test the failure case. Turn off the desktop host, disconnect the side router’s uplink, or temporarily disable the router core—whichever matches your design—and observe whether clients fail closed, connect directly, or lose internet access. There is no single correct behavior for every household, but it should be predictable. Explain the fallback to other users and label the Wi-Fi networks clearly so they know which connection to choose.
For a dependable home setup, make one change at a time and keep notes of the listener address, port, router subnet, and which devices use each path. Begin with one client, confirm DNS and local access, then expand gradually. Once the design is stable, keep the profile and router firmware maintained, review access controls after network changes, and avoid exposing local proxy or management ports beyond the trusted network.
Take Full Control of Your Traffic with Clash
Available on Windows, macOS, Linux, Android, and iOS. Flexible rules, simple setup, ready to use.